Roof Trim: Removal
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
- Adjust the passenger's seat position.
- Remove the headrest.
- Move the passenger's seat to the front-most position, and move the backrest to the front-most position.
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
- Remove the driver's seat. Ref. to SEATS>FRONT SEAT>REMOVAL
- Remove the rear seat cushion assembly and the backrest assembly. Ref. to SEATS>REAR SEAT>REMOVAL
- Remove the cover side sill front Rr and the trim panel assembly B pillar LWR. Ref. to EXTERIOR/INTERIOR TRIM>LOWER INNER TRIM>REMOVAL
- Remove the trim panel assembly A pillar and the trim panel assembly B pillar UPR. Ref. to EXTERIOR/INTERIOR TRIM>UPPER INNER TRIM>REMOVAL
- Remove the trim panel assembly C pillar LWR and the trim panel assembly C pillar. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>REMOVAL
- Remove the console box assembly. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>REMOVAL
- Remove the cover center side. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CONSOLE>REMOVAL
- Remove the trim panel rear door LH. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>REMOVAL>REAR DOOR
- Remove the light assembly map. Ref. to LIGHTING SYSTEM>SPOT MAP LIGHT>REMOVAL
- Remove the cover EyeSight and disconnect the stereo camera connector. (Models with EyeSight) Ref. to EYESIGHT>STEREO CAMERA>REMOVAL
- Disconnect the lens hood connector. (Models with EyeSight) Ref. to EYESIGHT>LENS HOOD>REMOVAL
- Disconnect the mirror assembly inner rearview HBA connector. (Model with automatic anti-glare mirror) Ref. to GLASS/WINDOWS/MIRRORS>REARVIEW MIRROR>REMOVAL>AUTOMATIC ANTI-GLARE MIRROR
- Remove the sun visor assembly and hook sun visor. Ref. to EXTERIOR/INTERIOR TRIM>SUN VISOR>REMOVAL
- Remove all assist grips. Ref. to EXTERIOR/INTERIOR TRIM>ASSIST GRIP>REMOVAL
- Remove the trim panel roof assembly.
- Remove the harness clips of the cord assembly antenna and the cord assembly roof, and disconnect the connectors.
- Remove the garnish sunroof. (Model with sunroof)
- Release the clips.
- Remove the weather strip body side flange from the front/rear and left/right doors, and remove the trim panel roof assembly.
- Take out the trim panel roof assembly from the rear door opening on the driver's side to outside.
- Remove each part as required.
- Light assembly roof
- Cord assembly antenna
- Cord assembly roof