LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Limited >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Rear Gate Garnish >> Removal

Rear Gate Garnish: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  2. Remove the trim panel - rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>REMOVAL .
  3. Remove the garnish assembly - rear gate.
    1. Remove the nuts.
      G11246506Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the clips and remove the garnish assembly - rear gate.
      G11246507Courtesy of SUBARU OF AMERICA, INC.
  4. As necessary, remove each part from the garnish assembly - rear gate.
scientia non olet · About LEMON Manuals