ECM Cancel Code(s) Display: List
WARNING: This page is about a different variant/trim than selected.
- List of ECM cruise control cancel code(s) When the cruise control is cancelled, the ECM outputs the following cancel codes.
| Cancel Code | Item | Contents of diagnosis | Note |
|---|---|---|---|
| 11 | Main Switch | Main switch of the EyeSight steering switch is turned to OFF, and the cruise control is released. | This code is displayed without operating the main switch. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>11 . |
| 12 | Stop and Brake switch | Stop light switch or brake switch is turned to ON, and then the cruise control is released. | This DTC is displayed without depressing the brake pedal. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>12 . |
| 14 | Neutral Position Switch | Neutral position switch is turned to ON, and then the cruise control is released. | This code is displayed without shifting to neutral position. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>14 . |
| 15 | Cancel switch | Cancel switch is turned to ON, and then the cruise control is released. | This DTC is displayed without operating the cancel switch. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>15 . |
| 16 | Ignition Switch | Ignition switch is turned to OFF, and then the cruise control is released. | This DTC is displayed without operating the ignition switch. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>16 . |
| 21 | Abnormality of switches when Ignition switch on | When the ignition switch is turned to ON, each switch of the EyeSight steering switch is already turned ON. | This code is displayed when turning ignition switch to ON without operating the EyeSight steering switch. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>21 . |
| 22 | Abnormality of change in vehicle speed | Malfunction of vehicle speed signal variation is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>22 . |
| 24 | Abnormality of switches related to cruise control | Open circuit of the EyeSight steering switch is detected during cruise driving. (The system is judged as model without cruise control.) | This DTC is displayed with normal operation. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>24 . |
| 31 | Engine Speed |
|
Cruise in 2nd shift position or more. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>31 . |
| 32 | Cruse Control out of Range |
|
This DTC is displayed, though the vehicle speed is increased to the speed available for cruise set and set operation was performed again. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>32 . |
| 34 | Prohibition of cruise control at continuing big Accel. angle | The vehicle has been driven at higher speed than set vehicle speed for an abnormally long time (approximately 10 minutes) during cruise driving. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>34 . |
| 35 | Prohibition of cruise control at vehicle speed F/B malfunction | Set vehicle speed cannot be kept because of some reasons (steep uphill, parking brake, abnormal decrease of engine output, etc.) during cruise driving. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>35 . |
| 41 | VDC/TCS Operating | Vehicle dynamics control (VDC), TCS or EPB is operated during cruise driving or cruise setting. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>41 . |
| 43 | ABS/VDC Failure | When the cruise switch is ON, ABS or vehicle dynamics control (VDC) system malfunction is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>43 . |
| 44 | Body Integrated unit Failure | When the cruise switch is ON, body integrated unit system malfunction is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>44 . |
| 45 | Meter Failure | When the cruise switch is ON, combination meter malfunction is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>45 . |
| 47 | Adaptive cruise control ECM abnormal | When the cruise switch is ON, stereo camera malfunction is detected. | Check the DTCs related to stereo camera. |
| 49 | TCM Failure | Transmission control module (TCM) malfunction is detected during cruise driving or cruise setting. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>49 . |
| 53 | Adaptive cruise control compulsory cancellation | Stereo camera detects the release command of the cruise control during cruise driving or cruise setting operation. | Check the stereo camera. Check the ACC cancel code Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>ACC CANCEL CODE(S) DISPLAY . |
| 54 | Release SW | Brake control module detects the brake pedal operation by the driver during cruise driving or cruise setting operation. | If this code is detected when the brake pedal is not depressed intentionally, check the release switch. |
| 55 | Adaptive cruise control reception data abnormal | When the cruise switch is ON, malfunction is detected in the reception data from the stereo camera. | Check the cancel code of stereo camera. |
| 61 | Brake Switch Failure | Malfunction in the stop light and brake switch is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>61 . |
| 62 | Neutral Switch Failure | Neutral position switch malfunction is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>62 . |
| 63 | Abnormality 1 of change in vehicle speed | Malfunction of vehicle speed signal variation is detected. This code may be displayed by a sudden starting of the vehicle on a road with low u and with the VDC OFF. In this case, restart the engine and perform the cruise setting again. If the cancel code is not displayed, the vehicle is in normal status. |
Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>63 . |
| 64 | Engine Sensor Failure 1 | Malfunction related to engine is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>64 . |
| 65 | Abnormality 1 of switches related to cruise control | Malfunction of EyeSight steering switch is detected. (When the switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected.) | Check EyeSight steering switch. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>65 . |
| 66 | Cruise Control Calculation Error | Malfunction of the cruise control calculation (microcomputer) is detected. | Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>66 . |