LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Manual Transaxle & Differential (5MT)) >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission assembly from the vehicle. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)> MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
  2. Remove the transfer case together with the extension case assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>TRANSFER CASE AND EXTENSION CASE ASSEMBLY>REMOVAL .
  3. Remove the transmission case. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>TRANSMISSION CASE>REMOVAL .
  4. Remove the drive pinion shaft assembly.
    NOTE: Use a hammer handle, etc. to remove if too tight.
    G13937431Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the main shaft assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)> MAIN SHAFT ASSEMBLY>REMOVAL .
scientia non olet · About LEMON Manuals