LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Manual Transaxle & Differential (5MT)) >> Transfer Case and Extension Case Assembly >> Removal

Transfer Case and Extension Case Assembly: Removal

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission assembly from the vehicle. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
  2. Remove the back-up light switch and the neutral position switch. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>SWITCHES AND HARNESS>REMOVAL .
  3. Remove the transfer case together with the extension case assembly.
    G08318938Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the gasket.
  5. Remove the shifter arm.
    G10322971Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the extension case assembly.
    G10322961Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the taper roller bearing (extension case side) outer race, dish plate and adjusting washer.
    G13937350Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the center differential and transfer driven gear.
    G10322963Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals