LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Front Washer Nozzle and Hose >> Removal >> Nozzle Wiper Arm Washer & Hose

Nozzle Wiper Arm Washer & Hose

CAUTION: Do not remove the nozzle wiper arm washer from the arm assembly windshield wiper assistor.
If nozzle replacement is required, replace the arm assembly windshield wiper assistor as a unit.
  1. Remove the arm assembly windshield wiper. Ref. to WIPER AND WASHER SYSTEMS>Front Wiper Arm>REMOVAL .
  2. Remove the cowl panel side and the cowl panel assembly. Ref. to EXTERIOR/INTERIOR TRIM>Cowl Panel>REMOVAL .
    CAUTION: Before removing the cowl panel, use an air blower and nylon brush to sweep gravel from the lower area of the front side of the glass.
  3. Release the claws, and remove the cover joint from cowl panel assembly.
    G13200923Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the hose wiper arm washer.
    G13200924Courtesy of SUBARU OF AMERICA, INC.