LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Front Wiper Arm >> Removal

Front Wiper Arm: Removal

CAUTION: When standing up the arm assembly windshield wiper, make sure to hold the arm portion. Holding the blade portion may cause the blade deformation.
  1. Remove the cover windshield wiper arm.
  2. Remove the arm assembly windshield wiper.
    1. Remove the nuts, and remove the arm assembly windshield wiper.
      G13200910Courtesy of SUBARU OF AMERICA, INC.
    2. Put alignment marks (a) at two places and disconnect the hose from the nozzle.
      G13200911Courtesy of SUBARU OF AMERICA, INC.
    3. Pull out the hose and remove the arm assembly windshield wiper assistor.
  3. When removing the hose from the joint washer hose, refer to the removal of "Nozzle wiper arm washer & hose". Ref. to WIPER AND WASHER SYSTEMS>Front Washer Nozzle and Hose>REMOVAL 
    CAUTION: Do not remove the nozzle wiper arm washer from the arm assembly windshield wiper assistor.
    If nozzle replacement is required, replace the arm assembly windshield wiper assistor as a unit.
scientia non olet · About LEMON Manuals