Section 20 (M/T Clutch System): Flywheel: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the manual transmission assembly.
- 5MT model: Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
- 6MT model: Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
Remove the clutch cover and clutch disc. Ref. to CLUTCH SYSTEM>CLUTCH DISC AND COVER>REMOVAL .
Attach the ST.
Preparation tool:

ST: CRANKSHAFT STOPPER (498497100)

Courtesy of SUBARU OF AMERICA, INC.
Remove the flywheel and crankshaft position sensor plate.
Drive out the pilot bearing from the flywheel.