LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Water Pump (FA20) >> Installation

Water Pump (FA20): Installation

  1. Engine water pump ASSY installation
    1. Install a new gasket and install the engine water pump ASSY with the five bolts.

      Standard value:T=6.4N.m {65kgf.cm} {4.7ft.lbf} 

  2. Water pump pulley installation
    1. Temporarily tighten the three bolts to secure the water pump pulley.
    2. Use the SST to secure the water pump pulley.

      SST 18355AA000, 18334AA030 

    3. Tighten the three bolts.

      Standard value: T=14N.m {143kgf.cm} {10.3ft.lbf} 

  3. Installation of exhaust manifold (Refer to INSTALLATION )
  4. Installation of V-belt (Refer to INSTALLATION )
  5. Replenishing of coolant (SUBARU Super Coolant) (Refer to COOLANT (FA20) )
  6. Leak check of coolant (SUBARU Super Coolant) (Refer to COOLING SYSTEM (FA20) )
  7. Under cover front AL installation (Refer to INSTALLATION , Step 10)
scientia non olet · About LEMON Manuals