LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical (H4DO)) >> Engine Mounting >> Installation >> Front Mounting Bracket

Front Mounting Bracket

WARNING: This page is about a different variant/trim than selected.
  1. Install the front mounting bracket.

    Tightening torque: 

    60 N.m (6.1 kgf-m, 44.3 ft-lb) 

  2. Install the front cushion rubber. Ref. to FRONT CUSHION RUBBER AND ENGINE MOUNTING BRACKET , INSTALLATION, Engine Mounting.
  3. Install the radiator fan and fan motor assembly. Ref. to INSTALLATION , Radiator Fan and Fan Motor Assembly.
scientia non olet · About LEMON Manuals