LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical (H4DO)) >> Chain Cover >> Disassembly

Chain Cover: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil filler cap.
    Fig 1: Locating Oil Filler Cap
    G10262603Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine oil filter and the oil pump union. Ref. to REMOVAL , Engine Oil Filter.
  3. Remove the oil pressure switch. Ref. to REMOVAL , Oil Pressure Switch.
  4. Remove the engine oil temperature sensor. Ref. to REMOVAL , Engine Oil Temperature Sensor.
  5. Remove the oil control solenoid. Ref. to REMOVAL , Oil Control Solenoid.
  6. Remove the camshaft position sensor. Ref. to REMOVAL , Camshaft Position Sensor.
scientia non olet · About LEMON Manuals