LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT) (H6DO)) >> Transfer Reduction Driven Gear >> Installation

Transfer Reduction Driven Gear: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the reduction driven gear assembly.
    Fig 1: Identifying Reduction Driven Gear Assembly
    G06654532Courtesy of SUBARU OF AMERICA, INC.
  2. Select shims. Ref. to ADJUSTMENT , Transfer Reduction Driven Gear.
  3. Install the transfer clutch assembly. Ref. to INSTALLATION , Transfer Clutch.
  4. Install the rear drive shaft. Ref. to INSTALLATION , Rear Drive Shaft.
  5. Mount the selected shim onto ball bearing.
  6. Install the extension case. Ref. to INSTALLATION , Extension Case.
  7. Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
scientia non olet · About LEMON Manuals