Rear Drive Shaft: Installation

WARNING: This page is about a different variant/trim than selected.

Select the thrust needle bearing. Ref. to ADJUSTMENT , Rear Drive Shaft.
Install the selected thrust needle bearing to transfer clutch assembly.
NOTE: Install the thrust needle bearing in the correct direction.

Fig 1: Identifying Thrust Needle Bearing And Transfer Clutch Assembly
Courtesy of SUBARU OF AMERICA, INC.
Install the rear drive shaft.

Fig 2: Identifying Rear Drive Shaft
Courtesy of SUBARU OF AMERICA, INC.
Install the extension case. Ref. to INSTALLATION , Extension Case.
Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.