LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H6DO)) >> Engine Mounting >> Removal >> Front Mounting Bracket

Front Mounting Bracket

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator fan and fan motor assembly. Ref. to REMOVAL , Radiator Fan and Fan Motor Assembly.
  2. Remove the front cushion rubbers. Ref. to FRONT CUSHION RUBBER , REMOVAL, Engine Mounting.
  3. Remove the front mounting bracket from the cradle and the bracket.
    Fig 1: Identifying Front Mounting Bracket Bolts
    G10263961Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the bracket from the cradle.
    Fig 2: Identifying Cradle Bracket Bolts
    G10263962Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals