LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H6DO)) >> CAM Sprocket >> Removal

CAM Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the V-belts. Ref. to REMOVAL , V-belt.
  2. Remove the crank pulley. Ref. to REMOVAL , Crank Pulley.
  3. Remove the chain cover. Ref. to REMOVAL , Chain Cover.
  4. Remove the timing chain assembly. Ref. to REMOVAL , Timing Chain Assembly.
  5. Use the ST to lock the CAM sprocket, and remove the CAM sprocket bolt.

    ST 499977500 CAM SPROCKET WRENCH

    • IN side
      Fig 1: Removing CAM Sprocket Bolt (IN Side)
      G05667843Courtesy of SUBARU OF AMERICA, INC.
    • EX side
    Fig 2: Removing CAM Sprocket Bolt (EX Side)
    G05667844Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the CAM sprocket.
scientia non olet · About LEMON Manuals