Heater and Cooling Unit: Installation

CAUTION:

Replace O-rings and clamps with new parts and install securely.
Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .

Install each part in the reverse order of removal.
Tightening torque:

Heater cooling unit: Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C)>General Description>COMPONENT>HEATER AND COOLING UNIT .

Air conditioning unit: Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C)>General Description>COMPONENT>AIR CONDITIONING UNIT .
Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
Fill engine coolant.
- Non-turbo model: Ref. to COOLING(H4DO)>Engine Coolant>REPLACEMENT>FILLING OF ENGINE COOLANT .
- Turbo model: Ref. to COOLING(H4DOTC)>Engine Coolant>REPLACEMENT>FILLING OF ENGINE COOLANT .
Charge refrigerant. Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C)>Refrigerant Charging Procedure>PROCEDURE .