LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Cooling System (WRX-STI)) >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator. < Ref. to REMOVAL , Radiator. >
  2. Remove the V-belts. < Ref. to REMOVAL , V-belt. >
  3. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  4. Remove the timing belt cover. < Ref. to REMOVAL , Timing Belt Cover. >
  5. Remove the timing belt. < Ref. to REMOVAL , Timing Belt. >
  6. Remove the automatic belt tension adjuster (A).
  7. Remove the belt idler (B).
  8. Remove the belt idler No. 2 (C).
    Fig 1: Installing Belt Idler No. 2
    G07910956Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the cam sprocket LH. < Ref. to REMOVAL , Cam Sprocket. >
  10. Remove the belt cover No. 2 LH.
    Fig 2: Locating Belt Cover No. 2 Bolt (LH)
    G08539489Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the tensioner bracket.
    Fig 3: Locating Tensioner Bracket Bolts
    G07909879Courtesy of SUBARU OF AMERICA, INC.
  12. Disconnect the hose from water pump.
  13. Remove the water pump.
    Fig 4: Removing Water Pump
    G04997829Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals