LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical (WRX-STI)) >> Timing Belt Cover >> Removal

Timing Belt Cover: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. Remove the secondary air pump. < Ref. to REMOVAL , Secondary Air Pump. >
  2. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  3. Remove the timing belt cover RH (B) together with the engine harness cover (A).
  4. Remove the timing belt cover LH (D) together with the engine harness stay (C).
  5. Remove front timing belt cover (E).
    Fig 1: Loosening Front Timing Belt Cover Bolts
    G10265329Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals