LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical (WRX-STI)) >> Cam Sprocket >> Removal

Cam Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  2. Remove the timing belt cover. < Ref. to REMOVAL , Timing Belt Cover. >
  3. Remove the timing belt. < Ref. to REMOVAL , Timing Belt. >
  4. Remove the actuator covers of the intake and exhaust cam sprockets.
  5. Use the ST to lock the cam sprocket, and remove the cam sprocket bolt.

    ST 499977500 CAM SPROCKET WRENCH

    Fig 1: Removing Cam Sprocket Bolt Using Cam Sprocket Wrench (499977500)
    G06345166Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the cam sprocket.
scientia non olet · About LEMON Manuals