LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Manual Transaxle & Differential (TY85) (WRX-STI)) >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual transmission assembly from the vehicle. < Ref. to REMOVAL , Manual Transmission Assembly. >
  2. Prepare the transmission for overhaul. < Ref. to PREPARATION FOR OVERHAUL . >
  3. Remove the neutral position switch, back-up light switch and harness. < Ref. to REMOVAL , Neutral Position Switch. > < Ref. to REMOVAL , Back-up Light Switch. >
  4. Remove the extension case. < Ref. to REMOVAL , Extension Case. >
  5. Remove the transfer driven gear. < Ref. to REMOVAL , Transfer Driven Gear. >
  6. Remove the center differential. < Ref. to REMOVAL , Center Differential. >
  7. Remove the transmission case. < Ref. to REMOVAL , Transmission Case. >
  8. Remove the individual gear assemblies. < Ref. to REMOVAL , Main Shaft Assembly. >
  9. Remove the drive pinion shaft assembly.
    Fig 1: Removing Drive Pinion Shaft Assembly
    G05003473Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals