Timing Belt Cover: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When replacing a single part, perform the work with the engine assembly installed to body.

Remove the secondary air pump. < Refer to REMOVAL , Secondary Air Pump. >
Remove the crank pulley. < Refer to REMOVAL , Crank Pulley. >
Remove the timing belt cover RH (A).
Remove the timing belt cover LH (B).
Remove the front timing belt cover (C).

Fig 1: Front Timing Belt Cover With Mounting Fasteners
Courtesy of SUBARU OF AMERICA, INC.