Crank Pulley: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When replacing a single part, perform the work with the engine assembly installed to body.

Remove the V-belts. < Refer to REMOVAL , V-belt. >
Use the ST to lock the crank pulley, and remove the crank pulley bolt.
ST 499977400 CRANK PULLEY WRENCH

Fig 1: Removing Crank Pulley Bolt Using Crank Pulley Wrench
Courtesy of SUBARU OF AMERICA, INC.
Remove the crank pulley.