Water Pump: Installation
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
- Install the water pump to rear chain cover.NOTE: Apply engine coolant to O-ring.
Tightening torque
6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
- Install the timing chain assembly.
< Ref. to INSTALLATION , Timing Chain Assembly. >
- Install the front chain cover.
< Ref. to INSTALLATION , Front Chain Cover. >
- Install the V-belts.
< Ref. to INSTALLATION , V-belt. >
- Install the radiator. < Ref. to INSTALLATION , Radiator. >
- Fill engine coolant. < Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >