Cam Sprocket: Installation
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cam sprocket. To lock the camshaft, use the ST.
Tightening torque:
29.5 N.m (3.0 kgf-m, 21.8 ft-lb)
- Further tighten the bolt.
Tightening angle:
Intake
45°±5°
Exhaust
25°±5°
ST 499977500 CAM SPROCKET WRENCH
ST 18231AA020 CAM SPROCKET WRENCH
- Install the timing chain assembly.
< Ref. to INSTALLATION , Timing Chain Assembly. >
- Install the front chain cover.
< Ref. to INSTALLATION , Front Chain Cover. >
- Install the crank pulley. < Ref. to INSTALLATION , Crank Pulley. >