LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H4SO)) >> Valve Rocker Assembly >> Removal

Valve Rocker Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove V-belt. < Ref. to REMOVAL , V-BELT. >
  2. Remove crankshaft pulley. < Ref. to REMOVAL , CRANKSHAFT PULLEY. >
  3. Remove timing belt cover. < Ref. to REMOVAL , TIMING BELT COVER. >
  4. Remove timing belt. < Ref. to REMOVAL , TIMING BELT. >
  5. Remove camshaft sprocket. < Ref. to REMOVAL , CAMSHAFT SPROCKET. >
  6. Disconnect PCV hose and remove rocker cover.
  7. Removal of valve rocker assembly
    1. Remove bolts (a) through (h) in alphabetical sequence.
      NOTE: Leave two or three threads of bolts (g and h) engaged to retain valve rocker assembly.
      Fig 1: Identifying Valve Rocker Assembly Bolts
      G04988313Courtesy of SUBARU OF AMERICA, INC.
    2. Remove valve rocker assembly.
      Fig 2: Removing Valve Rocker Assembly
      G04988314Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals