LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H4SO)) >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove V-belt. < Ref. to REMOVAL , V-BELT. >
  2. Remove crankshaft pulley bolt. To lock crankshaft, use ST.

    ST 499977100 CRANKSHAFT PULLEY WRENCH

    Fig 1: Removing Crankshaft Pulley Bolt Using ST
    G04988281Courtesy of SUBARU OF AMERICA, INC.
  3. Remove crankshaft pulley.
scientia non olet · About LEMON Manuals