LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H4SO)) >> Camshaft Sprocket >> Removal

Camshaft Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove V-belt. < Ref. to REMOVAL , V-BELT. >
  2. Remove crankshaft pulley. < Ref. to REMOVAL , CRANKSHAFT PULLEY. >
  3. Remove timing belt cover. < Ref. to REMOVAL , TIMING BELT COVER. >
  4. Remove timing belt. < Ref. to REMOVAL , TIMING BELT. >
  5. Remove camshaft position sensor. < Ref. to REMOVAL , CAMSHAFT POSITION SENSOR. >
  6. Remove camshaft sprocket No. 1 and No. 2. To lock camshaft, use ST.

    ST 18231AA010 CAMSHAFT SPROCKET WRENCH

    NOTE: CAMSHAFT SPROCKET WRENCH (499207100) is also can be used.
    Fig 1: Removing Camshaft Sprocket Using ST
    G04997663Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals