Camshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from camshaft position sensor.

Fig 2: Disconnecting Connector From Camshaft Position Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which installs camshaft position sensor to camshaft position sensor support.

Fig 3: Locating Camshaft Position Sensor Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which installs camshaft position sensor support to camshaft cap LH.

Fig 4: Locating Camshaft Position Sensor Support Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove camshaft position sensor and camshaft position sensor support as a unit.
Remove camshaft position sensor itself.

Fig 5: Identifying Camshaft Position Sensor And Camshaft Position Sensor Support
Courtesy of SUBARU OF AMERICA, INC.