LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Clutch System) >> Clutch Pedal >> Installation

Clutch Pedal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.

    Tightening torque: 18 N.m (1.8 kgf-m, 13.0 ft-lb) 

    NOTE:
    • Be careful not to kink the accelerator cable.
    • Always use new clevis pins.
  2. Adjust the clutch pedal after installation. < Ref. to ADJUSTMENT , CLUTCH PEDAL. >
  3. Adjust the clutch switch (starter interlock). < Ref. to ADJUSTMENT , Clutch Switch. >
scientia non olet · About LEMON Manuals