Clutch Switch: Adjustment

WARNING: This page is about a different variant/trim than selected.

Loosen the clutch switch mounting lock nut (Starter interlock).

Fig 1: Identifying Clutch Switch Mounting Lock Nut (Starter Interlock)
Courtesy of SUBARU OF AMERICA, INC.
Fully depress the clutch pedal.
Adjust the clutch pedal plate and clutch switch so that the gap between them is 3 - 3.5 mm (0.12 - 0.14 in).

Fig 2: Identifying Clutch Pedal Plate And Clutch Switch
Courtesy of SUBARU OF AMERICA, INC.
Tighten the lock nut.
Tightening torque (Clutch stopper nut): 8 N.m (0.8 kgf-m, 13.0 ft-lb)