LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Engine Malfunction Indicator Lamp (MIL) >> Procedure

Engine Malfunction Indicator Lamp (MIL): Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURE

1. Activation of check engine malfunction indicator lamp (MIL). < Ref. to ACTIVATION OF CHECK ENGINE MALFUNCTION INDICATOR LAMP (MIL)  . >
↓
2. Check engine malfunction indicator lamp (MIL) does not come on. < Ref. to CHECK ENGINE MALFUNCTION INDICATOR LAMP (MIL) DOES NOT COME ON.  . >
↓
3. Check engine malfunction indicator lamp (MIL) does not go off. < Ref. to CHECK ENGINE MALFUNCTION INDICATOR LAMP (MIL) DOES NOT GO OFF.  . >
↓
4. Check engine malfunction indicator lamp (MIL) does not blink at a cycle of 3 Hz. < Ref. to CHECK ENGINE MALFUNCTION INDICATOR LAMP (MIL) DOES NOT BLINK AT A CYCLE OF 3 HZ.  . >
↓
5. Check engine malfunction indicator lamp (MIL) remains blinking at a cycle of 3 Hz. < Ref. to CHECK ENGINE MALFUNCTION INDICATOR LAMP (MIL) REMAINS BLINKING AT A CYCLE OF 3 HZ.  . >
scientia non olet · About LEMON Manuals