Disassemble/Assemble Front Bumper - AR88.20-P-2050SRA
MODEL 453.3/4
Shown with code V07 (Front fog lamp (FFO)) and code 252 (COLLlSlON PREVENTiON ASSlST)
Shown except code V07 (Front fog lamp (FFO)) and except code 252 (COLLISION PREVENTION ASSIST)
Shown except code V07 (Front fog lamp (FFO))
| Remove | |||
| 1 | Remove front bumper (1) and lay down on suitable subsurface | AR88.20-P-2000SRA | |
| Disassemble/assemble | |||
| 2 | Remove license plate and license plate brackets | ||
| 3 | Disconnect electrical connectors (20) | ||
| 4 | Disconnect electrical connectors (21) | Model 453.3/4 with code V07 (Front fog lamps (FFO)) |
|
| 5 | Disconnect electrical connection (22) | Model 453.3/4 with code 252 (COLLISION PREVENTION ASSIST) |
|
| 6 | Expose electrical wiring harness (2) and remove | Figure | |
| 7 | Unscrew bolts (3) and remove left turn signal lamp (E6/1) and right turn signal lamp (E6/2) | ||
| 8 | Remove radiator grille (4) | AR88.40-P-4001SRA | |
| 9.1 | Unscrew bolts (5) and remove covers (6) in direction of arrow | Model 453.3/4 except code V07 (Front fog lamps (FFO)) |
|
| 9.2 | Unscrew bolts (5) and remove left front fog lamp (E5/1) and right front fog lamp (E5/2) in direction of arrow | Model 453.3/4 with code V07 (Front fog lamps (FFO)) |
|
| 10 | Press barb on towing eye cover (7) together and remove towing eye cover (7) | ||
| 11 | Unclip retaining clips (8) | ||
| 12 | Unclip retaining clips (9) | ||
| 13 | Unclip retaining clips (10) and remove lower radiator grille (11) | ||
| 14 | Drill off heads of rivets (12) | ||
| 15 | Unclip lower front compartment cover (13) and remove | Fig 2 | |
| 16 | Unclip center wind deflector (14) and remove | ||
| 17 | Unclip retaining clips (15) | ||
| 18 | Unclip front spoiler (16) | Fig 2 | |
| 19 | Remove rests of rivet from rivets (12) | ||
| 20 | Assemble in the reverse order | ||
| Install | |||
| 21 | Install front bumper (1) | AR88.20-P-2000SRA |