Remove/install center air outlet flap actuator motor - AR83.10-P-2019CW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 204, 207, 212, 218 with CODE (581) Comfort automatic air conditioning

Fig 1: Center Air Outlet Flap Actuator Motor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove dashboard	Model 204.0/2/3	AR68.10-P-1000CW
		Model 204.9	AR68.10-P-1000CY
		Model 207, 212	AR68.10-P-1000EW
		Model 218	AR68.10-P-1000EL
2	Remove crossmember for dashboard (1) far enough until the left center outlet flap actuator motor (M2/12) is accessible and can be removed	When removing the left center outlet flap actuator motor (M2/12).
2		Models 204, 207, 212 Model 218	AR68.10-P-1120CW
3	Remove bolts (3)	When removing the left center outlet flap actuator motor (M2/12).
4	Detach electrical connector (4) and remove left center outlet flap actuator motor (M2/12)	When removing the left center outlet flap actuator motor (M2/12).
5	Remove bolts (2)	When removing the right center outlet flap actuator motor (M2/13).
6	Detach electrical connector (5), position right center outlet flap actuator motor (M2/13) (arrows) and lead out between the air conditioner housing (A32) and the crossmember for the dashboard (1)	When removing the right center outlet flap actuator motor (M2/13).
7	Install in the reverse order
8	Teach in and normalize the left center outlet flap actuator motor (M2/12) or the right center outlet flap actuator motor (M2/13)	Menu item: Control unit adaptations, teach in actuator motors, normalize actuator motors.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A