Remove/install air pump for multicontour seat - AR91.25-P-1430EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212, 218 with CODE 409 (Left/right front multicontour seat)
Shown on model 212.0
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1.1 | Switch off ignition and remove transmitter key from electronic ignition lock control unit | MODEL 212, 218 with CODE 409 (Left/right front multicontour seat) without CODE 889 (KEYLESS-GO) |
|
| 1.2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | MODEL 212, 218 with CODE 409 (Left/right front multicontour seat) with CODE 889 (KEYLESS-GO) |
|
| 2.1 | Remove left side lining (1) in trunk | MODEL 212.0/1, 218.3 with CODE 409 (Left/right front multicontour seat) |
|
| MODEL 212.0/1 with CODE 409 (Left/right front multicontour seat) |
AR68.30-P-4600EW | ||
| MODEL 218.3 with CODE 409 (Left/right front multicontour seat) |
AR68.30-P-4600EL | ||
| 2.2 | Remove left side load compartment lining | MODEL 212.2, 218.9 with CODE 409 (Left/right front multicontour seat) |
|
| MODEL 212.2 with CODE 409 (Left/right front multicontour seat) |
AR68.30-P-1180ES | ||
| MODEL 218.9 with CODE 409 (Left/right front multicontour seat) |
AR68.30-P-1180ELX | ||
| 3 | Remove left side cargo area soundproofing | MODEL 212.2 with CODE 409 (Left/right front multicontour seat) |
|
| 4 | Unscrew nuts (3) | MODEL 212, 218 with CODE 409 (Left/right front multicontour seat) with CODE 810 (Sound system) |
|
| 5 | Loosen nut (2) until bracket (4) is accessible | MODEL 212, 218 with CODE 409 (Left/right front multicontour seat) with CODE 810 (Sound system) |
|
| 6 | Place bracket (4) with sound system amplifier control unit (N40/3) to one side | MODEL 212, 218 with CODE 409 (Left/right front multicontour seat) with CODE 810 (Sound system) |
|
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| 7 | Loosen bolts (5) | ||
| 8 | Route housing (6) on screws/bolts (5) upwards out of the keyhole-shaped openings in the body | ||
| 9 | Expose electrical wiring harness (7) and pneumatic lines (9) on brackets (8) of housing (6) | ||
| 10 | Remove multicontour seat pneumatic pump (M40) with foam insert (10) from housing (6) | ||
| 11 | Remove foam insert (10) | ||
| 12 | Disconnect electrical connection (11) | ||
| 13 | Disconnect pneumatic lines (9) from multicontour seat pneumatic pump (M40) and remove multicontour seat pneumatic pump (M40) | Figure | |
| 14 | Install in the reverse order |