LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Steering - 212 Chassis - 1 Of 2) >> Testing & Repair >> Remove/install expansion reservoir >> Remove/install expansion reservoir - AR46.25-P-1000EWI

Remove/install expansion reservoir - AR46.25-P-1000EWI

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 172, 207, 212 with ENGINE 651 

Fig 1: Expansion Reservoir Remove/Install Components
G09976731Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove power steering pump (1)   AR46.30-P-0500EWI 
2 Release clip (2)    
3 Remove bolt (3) and remove expansion reservoir (4) from power steering pump (1) IMPORTANT Seal connections immediately.
IMPORTANT Replace gaskets.
 
SPECIAL TOOL Figure
TORQUE SPECIFICATION *BA46.30-P-1003-01R 
TORQUE SPECIFICATION *BA46.30-P-1003-01T 
4 Install in the reverse order    
5 Fill and bleed power steering pump (1) Model 172 AR46.30-P-0010V
Model 207 AR46.30-P-0010CW
Model 212 AR46.30-P-0010EW 
POWER STEERING PUMP

Number Designation Model 172 without engine 152 Model 172 with engine 152
BA46.30-P-1003-01R Expansion reservoir bolt Nm 9 9
POWER STEERING PUMP

Number Designation Model 212
BA46.30-P-1003-01T Expansion reservoir bolt Nm 9
Fig 2: Identifying Set Of Stop Plugs (129 589 00 91 00)
G09976732Courtesy of MERCEDES-BENZ USA