Remove/install electric fan - AR20.40-P-5000MEV
ENGINE 780.009 in MODEL 451.391/491 For electric drive motor
| Risk of death when touching components on vehicles with high-voltage on-board electrical system | Do not touch components and open lines of the high-voltage on-board electrical system. Persons who wear electronic implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage on-board electrical systems. | AS54.00-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Note on the voltage on-board electrical system | AH54.00-P-0010-01A | ||
| Note on high-voltage battery | AH54.10-P-0006-01MEV | ||
| Remove/install | |||
| 1 | Remove vehicle key and mains plug | ||
| 2 | Carry out disconnection of high-voltage system | AR54.10-P-1160MEV | |
| 3 | Lower and position rear drive module | AR01.00-P-3050MEV | |
| 4 | Disconnect electrical connection (1) from electric drive fan motor and high voltage charger (M4/8) | ||
| 5 | Unclip electric drive fan motor and high voltage charger (M4/8) (arrow A) and remove upwards out of the shackles (arrow B) | ||
| 6 | Install in the reverse order |