Replace coolant - AP20.00-P-2080MCC
ENGINE 132.9 in MODEL 451.3/4
MODIFICATION NOTES
| 26.09.2014 | Coolant mixing ratio | BF20.00-P-1001-04A |
| Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| Notes on coolant | AH20.00-N-2080-01A | ||
| Check | |||
| 1 | Check coolant level | AP20.00-P-2010MCC | |
| Remove | |||
| 2 | Drain coolant | * not for USA ↓ |
|
| AR20.00-P-1142MCC | |||
| * for USA only ↓ |
|||
| AR20.00-P-1142MCU | |||
| Install | |||
| 3 | Pour in new coolant | *BF20.00-P-1001-04A | |
| * not for USA ↓ |
|||
| AR20.00-P-1142MCC | |||
| * for USA only ↓ |
|||
| AR20.00-P-1142MCU |
COOLANT MIXING RATIO
| Number | Designation | Engine all | |||
|---|---|---|---|---|---|
| BF20.00-P-1001-04A | Coolant mixing ratio | Antifreeze/water | Up to -37°C | % | 50/50 |
| As of -38 °C | % | 55/45 | |||
| Specification | Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1 | ||||
| Specification | Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1 | ||||
| Specification | Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1 | ||||