Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) - GF00.19-P-3000MCU
MODEL 451
| Z3/17 | Circuit 15 (fused) connector sleeve | GF00.19-P-3000-09MCU |
| Z3/24 | Circuit 15 (fused) connector sleeve, function | GF00.19-P-3000-17MCU |
| Z3/44 | Instrument cluster - radio circuit 15 (fused) connector sleeve | GF00.19-P-3000-09MCU |
| Z5/1 | Blower/fan connector sleeve | GF00.19-P-3000-18MCU |
| Z6/16 | Soft top ground connector sleeve | GF00.19-P-3000-19MCU |
| Z6/20 | Trunk lid ground connector sleeve | GF00.19-P-3000-19MCU |
| Z6/35 | Left door ground connector sleeve | GF00.19-P-3000-16MCU |
| Z6/36 | Right door ground connector sleeve | GF00.19-P-3000-16MCU |
| Z7/3 | Circuit 87 connector sleeve, injection valve 1 to 3 | GF00.19-P-3000-01MCU |
| Z7/4 | O2 sensor heater, wastegate valve circuit 30 connector sleeve | GF00.19-P-3000-01MCU |
| Z7/5 | Circuit 87 connector sleeve | GF00.19-P-3000-01MCU |
| Z7/24 | Circuit connector sleeve 87/1 | GF00.19-P-3000-04MCU |
| Z7/35 | Circuit 87 M1e connector sleeve | GF00.19-P-3000-04MCU |
| Z7/36 | Circuit 87 M2e connector sleeve | GF00.19-P-3000-04MCU |
| Z19/1 | CL [ZV] "open" connector sleeve | GF00.19-P-3000-17MCU |
| Z19/2 | CL [ZV] "closed" connector sleeve | GF00.19-P-3000-17MCU |
| Z20 | Connector sleeve cable end insulation not stripped, placed inside insulated tubing | GF00.19-P-3000-01MCU |
| Z20/29 | Screening end insulated from outer shield | GF00.19-P-3000-32MCU |
| Z21/6 | CL [ZV] status "open" connector sleeve | GF00.19-P-3000-17MCU |
| Z28/18 | Sound system/antenna control connector sleeve | GF00.19-P-3000-03MCU |
| Z29/4 | Circuit 58R (fused) connector sleeve | GF00.19-P-3000-17MCU |
| Z37/2 | CAN engine bus (low) connector sleeve | GF00.19-P-3000-09MCU |
| Z37/3 | CAN engine bus (high) connector sleeve | GF00.19-P-3000-09MCU |
| Z37/4 | Power steering CAN bus connector sleeve (low) | GF00.19-P-3000-09MCU |
| Z37/5 | Power steering CAN bus connector sleeve (high) | GF00.19-P-3000-09MCU |
| Z37/41 | CAN databus (high) connector sleeve | GF00.19-P-3000-17MCU |
| Z37/42 | CAN bus (low) connector sleeve | GF00.19-P-3000-17MCU |
| Z40 | Stop lamp signal connector sleeve | GF00.19-P-3000-09MCU |
| Z45 | ATA [EDW] sensor supply circuit 30 connector sleeve | GF00.19-P-3000-09MCU |
| Z51/6 | Circuit 58d connector sleeve | GF00.19-P-3000-16MCU |
| Z52/12 | Mirror adjustment connector sleeve | GF00.19-P-3000-16MCU |
| Z54/16 | Soft top control "open" connector sleeve | GF00.19-P-3000-06MCU |
| Z54/17 | Soft top control "closed" connector sleeve | GF00.19-P-3000-06MCU |
| Z78 | Cockpit LIN connector sleeve | GF00.19-P-3000-03MCU |
| Z78/1 | ATA [EDW] LIN connector sleeve | GF00.19-P-3000-03MCU |
| Z81 | Circuit 58d connector sleeve | GF00.19-P-3000-03MCU |
| Z83/11 | Shielding connector sleeve | GF00.19-P-3000-32MCU |
| GF00.19-P-3000-01MCU | Location and assignment of Z connector sleeves (cable connections in wiring harness) - engine compartment left | GF00.19-P-3000-01MCU |
| GF00.19-P-3000-03MCU | Location and assignment of Z connector sleeves (cable connections in wiring harness) - cockpit | GF00.19-P-3000-03MCU |
| GF00.19-P-3000-04MCU | Location and assignment of Z connector sleeves (cable connections in wiring harness) - interior left | GF00.19-P-3000-04MCU |
| GF00.19-P-3000-06MCU | Location and assignment of Z connector sleeves (connectors and wiring harness) - trunk left | GF00.19-P-3000-06MCU |
| GF00.19-P-3000-09MCU | Location and assignment of Z-connector sleeves (line connectors in wiring harness) in the area of the center console | GF00.19-P-3000-09MCU |
| GF00.19-P-3000-16MCU | Location and assignment of Z connector sleeves (line connectors in wiring harness) - doors | GF00.19-P-3000-16MCU |
| GF00.19-P-3000-17MCU | Location and assignment of Z connector sleeves (line connectors in wiring harness) - left footwell | GF00.19-P-3000-17MCU |
| GF00.19-P-3000-18MCU | Location and assignment of Z-connector sleeves (line connectors in wiring harness)- right footwell | GF00.19-P-3000-18MCU |
| GF00.19-P-3000-19MCU | Location and assignment of Z-connector sleeves (line connectors in wiring harness)- rear | GF00.19-P-3000-19MCU |
| GF00.19-P-3000-32MCU | Location and assignment of Z connector sleeves (connectors and wiring harness), left firewall | GF00.19-P-3000-32MCU |