LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 600619 Removing And Installing Roof Module (911 TARGA 4, 911 TARGA 4S) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cover for rear lock support. → REMOVING COVER FOR REAR LOCK SUPPORT 
  2. Remove trim panel for rear wall. → REMOVING TRIM PANEL FOR REAR WALL 
  3. Remove roof rail trim. → REMOVING ROOF RAIL TRIM 
  4. Remove front roof trim panel. → REMOVING FRONT ROOF TRIM PANEL 
  5. Remove rear side trim panel. → REMOVING REAR SIDE TRIM PANEL 
  6. Remove adjustment fitting (seat belt height adjuster). → REMOVING ADJUSTMENT FITTING (SEAT BELT HEIGHT ADJUSTER) 
  7. Remove rear three-point belt. → REMOVING REAR THREE-POINT BELT 
  8. Remove rear window cover. → REMOVING REAR WINDOW COVER
scientia non olet · About LEMON Manuals