LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 691219 Removing And Installing Rear Three-Point Belt (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, TARGA 4, TARGA 4S, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Removing Rear Three-Point Belt

Removing Rear Three-Point Belt

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Three-Point Belt Installation Position
G09827301Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screw -1-  from the deflector -2-  .
    Fig 2: Removing Rear Three-Point Belt
    G09827302Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screw -3-  from the automatic belt device -4-  and remove automatic belt device -4-  .
scientia non olet · About LEMON Manuals