LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 748 (97 - Cables) >> WM 975219 Removing and installing wire harness for engine >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install vacuum reservoir with secondary-air pump. → 245419 REMOVING AND INSTALLING VACUUM RESERVOIR
  2. Connect oxygen sensors downstream of the catalytic converter at the left and right and clip in all holders for the lines. → 247319 REMOVING AND INSTALLING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER
  3. Connect oxygen sensors upstream of the catalytic converter at the left and right and clip in all holders for the lines. → 246919 REMOVING AND INSTALLING OXYGEN SENSOR UPSTREAM OF CATALYTIC CONVERTER
  4. Install the generator. → 272219 REMOVING AND INSTALLING GENERATOR
  5. Install engine. → 100119 REMOVING AND INSTALLING ENGINE