LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (91 - Radio, Stereo, Telephone, On-Board Computer) >> WM 916219 Removing And Installing Control Unit For Steering Wheel Electronics >> Subsequent Work >> Touch up - Removing And Installing Control Unit For Steering Wheel Electronics

Touch up - Removing And Installing Control Unit For Steering Wheel Electronics

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install steering column switch. → Installing Steering-Column Switch
  2. Install steering column trim. → Installing Steering Column Trim
  3. Install steering wheel. → Installing Steering Wheel
  4. Install driver's airbag unit. → Installing Driver's Airbag Unit
  5. Read data into the control unit for steering wheel electronics. → 916219 REMOVE AND INSTALL CONTROL UNIT FOR STEERING WHEEL ELECTRONICS 
  6. Calibrate steering angle sensor. → Calibrating Steering-Angle Sensor