Installing Steering-Column Switch

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Slide steering column switch as far as it will go on to the steering column and secure with fastening screw. → Tightening torque: 4.5 ftlb.

Fig 1: Installing Steering Column Switch
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push on plug of steering column switch until it is felt to engage.

Fig 2: Inserting Plug
Courtesy of PORSCHE CARS NORTH AMERICA, INC.