Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Fix camshaft in place

To loosen the fastening screws on the camshaft controller, counter the relevant camshaft with an open-ended wrench (a/f 27).
To prevent damage, remove the camshaft guide.

Install the cylinder head cover. → Installing cylinder head cover
Install intake-air distributor. → Installing intake-air distributor
Install transmission.
1. For vehicles with manual transmission, see: → Installing transmission
2. Install flywheel. → Installing flywheel (dual-mass flywheel)
3. For vehicles with automatic transmission, see: → Installing transmission
4. Remove drive plate for torque converter. → Installing drive plate for torque converter on DFI engines
Install engine. → Installing engine
Install all engine compartment covers. → Installing front trim (engine compartment)