Installing Front Trim (Engine Compartment)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Trim (Engine Compartment)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install front trim panel on right and left.
1. 1.1. Insert front trim panel on right and left -1a, 1b- underneath the lid seal and position in engine compartment.
2. 1.2. Position fixing clips -2- on support in direction of the click stops and press into the supports.
  
  Fig 2: Installing Front Trim Panel On Right And Left
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install rear trim panel.
1. 2.1. Insert rear trim panel -3- underneath the lid seal and position in engine compartment.
2. 2.2. Position fixing clip -2- on the support in the direction of the click stops and press support in.
  
  Fig 3: Installing Rear Trim Panel
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install trim panel on the left.
1. 3.1. Insert trim panel on the left -4- underneath the lid seal and position in engine compartment.
2. 3.2. Position the fixing clips -2- on the supports in the direction of the click stops and press into the supports.
  
  Fig 4: Installing Trim Panel On Left
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install trim panel on the right.
1. 4.1. Insert trim panel on the right -6- underneath the lid seal and position in engine compartment.
2. 4.2. Position the fixing clips -2- on the supports in the direction of the click stops and press into the supports.
3. 4.3. Screw in fastening screw -5- at filler neck of washer-fluid reservoir.
4. 4.4. Position lid of washer fluid container at filler neck and close lid.
  
  Fig 5: Installing Trim Panel On Right
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.