LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (61 - Convertible Top, Hardtop -- (981) BOXSTER) >> WM 612319 Removing And Installing Rear Seal (Tension Bow) (CAYMAN "Black/Style Edition", BOXSTER, BOXSTER S, BOXSTER "Black/Style Edition", CAYMAN Gt4) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2016 Porsche Boxster, 2015 Porsche Boxster, 2014 Porsche Boxster, and 2013 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move convertible top to service position. →  6101IN IN-CONVERTIBLE TOP SERVICE POSITION  
  2. Remove B-pillar seal. →  Removing B-Pillar Seal 
  3. Remove flap. →  Removing Valve  
  4. Remove rubber seal with rail (lower side). →  Removing Rubber Seal With Rail (Lower Lateral)  
scientia non olet · About LEMON Manuals