Preliminary Work
WARNING: This page is about a different car, the 2016 Porsche Boxster, 2015 Porsche Boxster, 2014 Porsche Boxster, and 2013 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Information
The convertible top must be moved to various positions in order to gain the best possible access to the fitting areas shown below.
Information
Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.
- Remove three-point seat belt deflection fitting. → 691119 REMOVING AND INSTALLING FRONT THREE-POINT BELT
- Remove rear wall trim panel. → Removing trim panel for rear wall
- Loosen the roll-over bar. → Removing Roll-Over Bar
- Detach bowden cable. → Removing Lower Part Of Valve