LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (15 - Engine - Cylinder Head, Valve Control -- 92A Cayenne) >> WM 153719 Removing And Installing Hydraulic Valve For Camshaft Control (Cayenne) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake-air distributor. → REMOVING INTAKE-AIR DISTRIBUTOR - section on "Removing"
  2. Remove bar ignition modules. → REMOVING BAR IGNITION MODULES - section on "Removing"
  3. Remove cylinder head cover. → REMOVING CYLINDER HEAD COVER  - section on "Removing"
  4. Remove the timing-case cover at the top. → REMOVING TIMING-CASE COVER  - section on "Removing"
scientia non olet · About LEMON Manuals