LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 603555 Replacing Holder Unit (Drive Mechanism) (911 TARGA 4, 911 TARGA 4S) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Components stored or set down incorrectly
  • Risk of damage to component surfaces

→ Set the component down on a clean surface, workbench or assembly fixture.

  1. Remove roof assembly. → Removing Roof Module 
  2. Mount roof assembly on assembly fixture. → Mounting Roof Assembly On Assembly Fixture  
  3. Remove sunroof motor. → Removing Electric Motor For Sunroof 
  4. Remove frame for sliding-roof panel. → Removing Frame For Sliding Roof 
  5. Remove right fabric lining. → Removing Fabric Lining 
  6. Remove wire harness for sun blind. → REMOVING WIRE HARNESS FOR CONVERTIBLE TOP 
scientia non olet · About LEMON Manuals