Preliminary Work

→ Calibrate the AWS control unit if the passenger's seat was removed and re-installed, or if the seat bracket or AWS control unit was replaced.

→ Do not loosen the safety screws on the AWS sensors or seat frame.

→ Only replace retainer plate for seat adjustment motor on vehicles without AWS sensors.

→ Always replace the retainer plate together with the seat frame on vehicles with an AWS sensor.

1. Move front seat to the uppermost position.
2. Disconnect the battery. → CONNECTING AND DISCONNECTING BATTERY .
3. Remove front seat. → Removing Front Seat  .
4. Remove control panel trim. → Removing Trim Panel For Seat  .
5. Remove seat adjustment motor. → Removing Motor For Seat Adjustment  .